Select Page

Cycloidal pinwheel reducer is definitely a up-dated of brand-new type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin wheel clenching mechanism, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, Industry, conveyors and job machinery etc. various fields.
Features:

1. Gear is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all good contact functionality, gears and with great precision
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service existence and high bearing capacity;
5. easy to check, disassemble and assemble.

Operation specifications and precautions
1.High modularization design: various equip with various electric motor or other power type conveniently.Same machine type may equip with several power motor. It is easy to understand the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form large transmission ratio, i.e. end result suprisingly low rotary speed.
3.Form of assembly: the positioning to be installed isn’t limited.
4.High strength, small: the box body is made of large strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing potential of unitvolume is high.
5.Long life: Beneath the condition of correct type chosen (including choosing ideal operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except sporting parts) should not be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High velocity ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-straight down ratio and the efficiency is definitely more than 90%. If work with multi-speed get the speed-down ratio is certainly bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and end result shaft are in same axis centre, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can realize high reduction ratio product.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are two gears engaged with 180 degree symmetry. Accordingly, the effect of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, making the positioning precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, and they are all on the same axis, therefore the kit is simple to install and simple to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the weight is 1/2, but can buy the same torque capability and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with substantial fatigue strength.Not the same as ordinary transmission machine, the quantity of teeth meshing accounts for in regards to 30% of the full total number of teeth. Additionally, it is in contact with the surface, to ensure that the pressure borne by each gear is reduced and large torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high reduction ratio can be achieved while maintaining high efficiency, and miniaturization of driving motor could be realized.
8. Low noise
The apparatus meshing cycle quickness is low, the transmission motion force balance, which means procedure is quiet, and the vibration is very small.
◆High speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the input shaft and end result shaft are on the same axis line, so that the machine unit can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts creates the vibration and voice limited by a minimum.
◆Reliable use and very long service life because the primary parts are constructed of high carbon chromium steel, great strength is obtained by quenching (HRC58-62), and rolling friction is employed in a few transmission contacts, so the service life is long.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has many advantages, versatile, and can be both negative and positive operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The usage of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the application of a planetary transmitting, the source shaft and the output shaft on a single axis, making the model to get the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• minimal number of parts together with basic lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion precision, carrier and increase the output strength.

(2).Hoop clamp coupling have five connection ways suitable for different application environments.

(3).Size over PL/PF120(including)precision and high power integral inner gear housing, processed in a single station,which eliminate the cumulative mistake and assembling mistake of split type.Get rid of casting process;adopt warm of forging process, that will reduce the blank material defects.

(4).The meshing gear adopt shaving procedure after carburizing and quenching,which better to make gear surface smooth and high precision,reduce the temperature rising due to gear surface area gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dime nsions conform the same types of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, compact structure, radiate heat efficiently and low noise.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator may meet all types of speed requirement.